Loading The Ribbon Cartridge And Paper; Sp210 Type - Star SP200F Série Mode D'emploi

4. Loading the Ribbon Cartridge and Paper

4-1. SP210 type

4-1-1. Loading the Ribbon Cartridge
Power off
Fig. 4-1 Removing the cover
Ribbon feed
knob
Notched
part
Fig. 4-2 Loading the ribbon cartridge
1 Turn off power to the printer.
2 Lift the cover up approx. 3 cm.
Cover
3 Place the ribbon cartridge in the
4 Turn the ribbon feed knob of the
Print head
Ink ribbon
5 Mount the cover by reversing the
Ribbon cartridge
– 6 –
Hold the cover tilted at this an-
gle, then pull it toward you to
remove it.
direction shown in Fig. 4-2 and
press it down to load it. If loading
of the ribbon cartridge is not sat-
isfactory, press down the car-
tridge while rotating the ribbon
feed knob in the direction of the
arrow.
ribbon cartridge in the direction
of the arrow to remove slack in
the ribbon.
procedure outlined in step 2
above.