Star SP200F Série Mode D'emploi page 15

Positioning rib
Paper roll holder
Fig. 4-14
Paper
insertion
slit
Fig. 4-15 Insertion of the paper into
the auto cutter
7 Press the FEED (paper feed) switch
to feed the paper approximately
10cm.
Cover
Roll paper
8 Insert the tip of the roll paper in the
auto cutter paper slit.
• When using copying paper, insert
Auto
cutter
only the original (the upper paper)
into the slit of the auto cutter. Insert
the paper which is to be copied (the
lower paper) between the platen and
the auto cutter.
– 12 –