Appendix D: General Specifications - Star SP200F Série Mode D'emploi

Appendix D: General Specifications

Printing method:
Print direction:
Number of head pins:
Number of print columns:
Character set:
Font configuration
Paper width
CPI
Number of columns
Column spacing
Character size
(H × V mm)
Dot space
Print area
Print speed:
Line spacing:
Paper feed method:
Paper feed speed:
Paper specifications
Paper type:
Paper width:
Roll diameter:
Internal diameter of roll:
Thickness
Serial impact dot matrix
Bi-directional
7 wires
42 columns, 16 CPI
ASCII
Special characters
IBM special characters 83
International characters 12
7 (Half dots) × 7 or 9 (Half dots) × 7
16
42
(mm) 1.58
1.28 × 2.87
(mm)
0.316 × 0.423
(mm) 66.0
Approx. 2.5 lines per sec.
1/6-inch
Friction feed
Approx. 9 lines/sec.
Ordinary bond and carbonless copy paper
76±0.5 mm (3.0 inches)
85mm (3.35 inches) max.
12±1 mm
Note: The paper must not be glued to the core.
SP210 (single) 0.07 mm to 0.10 mm
(copies) Original + 2 copies (Max. 0.2 mm)
SP240 (single only) 0.07 mm to 0.10 mm
Note: The auto-cutter that is fitted to the SP-240 series is
designed to cut single ply paper to a maximum
thickness of 0.1mm. Cutting multi-ply paper, or
paper thicker than 0.1mm is not recommended as
the specifications of the auto-cutter cannot be
guaranteed.
– 101 –
96 (characters)
3.0 inch (76 mm)
13.4
35
1.90
1.59 × 2.87
0.316 × 0.423
66.0
64