Control Codes; Star Mode; Control Codes Used In Character Setting; Control Codes Used In Print Mode Setting - Star SP200F Série Mode D'emploi

STAR mode

6-1. Control Codes Used in Character Setting

Control codes

<ESC> "R" n
<ESC> "M"
<ESC> "P"
<SO>
<SI>
<DC4>
<ESC> "W" "1"
<ESC> "W" <1>
<ESC> "W" "0"
<ESC> "W" <0>

6-2. Control Codes Used in Print Mode Setting

Control codes
<ESC> "4"
<ESC> "5"
<ESC> "E"
<ESC> "F"

6-3. Control Codes Used in Line Spacing

Control codes
<LF>
<CR>
<ESC> "a" n
6. Control Codes
Hexadecimal codes Function
1B 52 n Select international character set. Default is accord-
ing to the dip switch settings 3, 4 and 5.
Select 7 × 7 (Half dots) character size (Default
1B 4D
setting)
Select 9 × 7 (Half dots) character size
1B 50
0E Select expanded character mode
0F Cancel expanded character mode
(Default setting)
14 Cancel expanded character mode
(Default setting)
1B 57 31 Select expanded character mode
1B 57 01
1B 57 30 Cancel expanded character mode
1B 57 00 (Default setting)
Hexadecimal codes Function
1B 34 Red color print selection (enable for SP216/246)
1B 35 Red color print deselection (enable for SP216/246)
(Default setting)
1B 45 Emphasized print mode selection
1B 46 Emphasized print mode deselection (Default set-
ting)
Hexadecimal codes Function
0A Line feed
0D Line feed (same as LF)
1B 61 n Feed paper n lines
– 19 –