Setting Up; Loading The Paper Roll - Star TSP400Z Série Mode D'emploi

First, remove the blue semi-transparent tape from all parts.
Before loading the first paper roll, be
sure to remove the cardboard and the
protective paper (under the tear bar)
that were inserted to protect the print
head during shipping.

5-1. Loading the Paper Roll

The procedure for loading a paper roll is as follows. The illustrations show the
TSP412Z printer. However, the loading procedure for the TSP442Z is the same.
Fig. 5-2
Paper roll
Fig. 5-3

5. Setting up

1 Switch off the printer's power.
Printer cover
2 Open the printer cover.
3 Cut the top edge of the paper straight
across. If the paper end is secured to
the roll by a label or by tape, unroll
the paper one turn and cut away all
traces of adhesive. (Adhesive can
Paper-roll shaft
stick to the internal paper roller and
interfere with paper feeding.)
4 Insert the paper-roll shaft into the
paper roll.
– 6 –
Fig. 5-1