Setting Up; Loading The Paper Roll - Star TSP400 Série Guide D'utilisation

First, remove the blue semi-transparent tape from all parts.
Before loading the first paper roll, be
sure to remove the cardboard and the
protective paper (under the tear bar)
that were inserted to protect the print
head during shipping.

1-1. Loading the Paper Roll

Your printer accepts thermal roll paper 60mm ~ 82mm wide.
The procedure for loading a paper roll is as follows. The illustrations show the
TSP412 printer, however, the loading procedure for the TSP442 is the same.
Fig. 1-2
Paper roll
Fig. 1-3

1. SETTING UP

1 Switch off the printer's power.
Printer cover
2 Open the printer cover.
3 Cut the top edge of the paper straight
Paper-roll shaft
4 Insert the paper-roll shaft into the
– 1 –
Fig. 1-1
across. If the paper end is secured to
the roll by a label or by tape, unroll
the paper one turn and cut away all
traces of adhesive. (Adhesive can
stick to the internal paper roller and
interfere with paper feeding.)
paper roll.