KTM Power Parts 77239974044 Instructions De Montage page 5

2
1
2a
A
1
3
Scope of supply 77239974044
1x motor control selector switch(1)
1x map switch set (2)
Scope of delivery 51539974044
1x map switch set
Preparations
- Remove the seat (see the Owner's Manual).
- Remove the tank (see the Owner's Manual).
Assembly
Mounting the switch on the handlebar, 2-stroke and 4-stroke
- Remove the clamp of the brake handle assembly and mount the map
switch(2a).
Mounting the cable, 4-stroke
- Route the map switch cable to the back with the main wiring harness (Figure
A - C).
B
C
- Connect the map switch cable (2b) to the motor control selector switch
(1) and to the vehicle wiring harness (3) (Figure D).
2b - Mount the motor control selector switch on the mounting tab that is already
standard equipment on the motorcycle (Figure D).
Route the cable neatly and without bends and tie it with cable binders.Ensure
that the handlebar can turn all the way.
D
76511010000
77239974000
51539974000
5