Operating The Gas Oven Programmable Lcd Clock; Setting The Timer - BORETTI VFPNR-94 AN Mode D'emploi

Operating the
Programmable LCD
Clock of a Gas Oven
Setting the Correct Time
Press on the button once. Then immediately
press on the + and – to adjust the minutes. Press
on the button again, and hold until the hour
starts to blink. You can now use the + and – but-
tons to set the hour.

Setting the Timer

Press on the + and – buttons to set the desired
cook time. A symbol will show in the display,
indicating that the timer has been set. The display
only indicates time left until the alarm sounds,
current time will not be shown during this pe-
riod. After the set time has passed, an alarm will
sound that you can switch off by pressing on the
button .
Adjusting the Audio Signal
You can adjust the audio signal by pressing the –
button until you hear a tone you like. Your range
cooker will remember the chosen setting and will
use the tone you selected from then on.
NOTE: It may occur that your Boretti with gas oven has five
buttons. In this case two buttons will have no function.
NL
FR
DE
EN
83