Storage Compartment; Replacing The Oven Lamp - BORETTI CFBG902AN Prescriptions De Montage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STORAGE COMPARTMENT

The storage compartment is accessible through the pivoting panel (fig. 7.14a).
Do not store flammable material in the oven or in the storage compartment.

REPLACING THE OVEN LAMP

WARNING: Ensure the appliance is
switched off and disconnected from the
electrical power supply before replacing
the lamp to avoid the possibility of
electric shock.
Let the oven cavity and the heating
elements to cool down.
Switch off the electrical supply.
Remove the protective cover "A" (fig.
7.14b).
Replace
the
with a new one suitable for high
temperatures
following specifications: 230V, 50 Hz
and same power (check watt power
as stamped in the lamp itself) of the
B
replaced lamp.

IMPORTANT
replace the bulb with bare hands;
contamination from your fingers can
A
cause premature failure. Always use a
clean cloth or gloves.
Refit the protective cover.
Note: Oven lamp replacement is not
covered by your guarantee.
halogen
lamp
(300°C)
having
WARNING:
Never
"C"
the
C
A
Fig. 7.14a
WRONG
CORRECT
Fig. 7.14b
209

Publicité

Table des Matières
loading

Table des Matières