Operating The Programmable Lcd Clock - BORETTI VFPNR-94 AN Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating the
Programmable LCD
Clock
None of the oven functions will work before you
have activated the clock on your Boretti. You
will recognize this by a full blinking display. This
might occur before first use, or following a power
disturbance. Functions for ventilated gas ovens
are different from multifunctional ovens. The pro-
grammable clock functions only work on ovens 60
and 80 cm wide. If you have a range cooker with
2 ovens, the clock will normally only work for the
left–hand oven. When programming the oven, if
the A blinks and an audio signal is heard, an er-
ror has occurred. Choose the manual function to
override previous settings.
Setting the Correct Time
Adjust the digital clock by pressing on the buttons
and
and using the + and – button at the
same time. Set the correct time in this way.
Manual Function
You can activate the manual function by simulta-
neously pressing buttons
and
ter A will disappear, and a symbol showing a pan
will appear. Any programs you set earlier will be
canceled by this procedure.
Adjusting the Audio Signal
You can set the audio signal by pressing the –
button until you hear a signal you like. Your range
cooker will remember the setting chosen and will
use the tone you selected from that moment on.
The Timer
Select the timer function by pressing the button
and using the + and – buttons to determine
the desired cook time. While the time counts
down, the clock symbol will remain lit up. When
the cook time has ended, an audio signal will
sound. When using this function, your oven must
be switched off manually. If you want the oven to
switch off automatically, you must use the pre–
programmed baking function set to the desired
cook time.
Pre–Programmed Baking
1. Pre–Programmed Baking Function with Cook
Time
This function allows you to use the oven for a
certain period of time, after which the oven will
switch off. Press the button
and – buttons to set the desired cook time. The A
symbol will appear in the display. Press the but-
ton
,if you want to see at what time the oven
will switch off. After the cook time has ended, the
oven will switch off automatically and the audio
signal will sound. The A will blink while the audio
signal sounds. By pressing buttons
at the same time, you will cancel the preset pro-
gram, and you can now use the manual function
for the oven.
. The let-
NL
FR
and use the +
DE
EN
and
81

Publicité

Table des Matières
loading

Table des Matières