Switching The Rds Convenience Function On/Off; Switching Reg On/Off (Only When The Tuner Region Is Europe); Selecting The Waveband / Memory Bank; Tuning Into A Station - Bosch CAD 12 Mode D'emploi Et De Montage

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 66
Radio operation
Note:
f
RDS is switched on at the
factory.
f
The factory setting for REG is off,
and it must be switched on or off
separately in the menu.
Switching the RDS convenience
function on/off
f If necessary, first switch to FM radio
operation.
f Press the MENU G button to open the
menu.
f Press the MENU G button repeatedly
until "RDS" appears on the display, along
with the current setting "ON" or "OFF".
f Turn the volume control B to the left or
right in order to switch RDS on or off.
f Press the MENU G button, repeatedly if
necessary, to close the menu.
The RDS convenience functions are active if
the RDS symbol appears on the display.
Switching REG on/off (only when
the tuner region is EUROPE)
f If necessary, first switch to radio opera-
tion.
f Press the MENU G button to open the
menu.
f Press the MENU G button repeatedly
until "REG" appears on the display, along
with the current setting "ON" or "OFF".
f Turn the volume control B to the left or
right in order to switch REG on or off.
f Press the MENU G button, repeatedly if
necessary, to close the menu.
Robert Bosch Car Multimedia GmbH
Note:
The REG ON/OFF setting takes effect
only if the RDS function is active.
Selecting the waveband / memory
bank
This device can be used to receive programs
from the following frequency bands, depend-
ing on the tuner region:
Europe: FM, MW, LW and SW
f
f
NAFTA: FM, AM and WB (weather band)
Others: FM and AM
f
There are three memory banks available for the
FM waveband (FM1, FM2 and FMT) and one
for each of the MW, LW, SW, AM and WB
wavebands. In addition, there is another AMT,
MWT, LWT or SWT memory bank. Six stations
can be stored in each memory bank.
In order to switch between the wave bands or
memory banks,
f press the BND N button.

Tuning into a station

There are various ways of tuning into a station.

Automatic station search

Note:
Automatic station searching is only
available if the "AUTOSEEK" setting
for the
or
selected (see the section on "Setting
button functions" in this chapter).
f Press the
or
The radio tunes into the next receivable
station.
7 620 210 015/020-022 | 06.2015
en | 47
H buttons has been
H button.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7 620 210 0157 620 210 0207 620 210 0217 620 210 022

Table des Matières