Switching On/Off - Bosch CCA 47 Mode D'emploi Et De Montage

Switching on and off

Switching on/off

There are various ways of switching the device
on/off:
Switching on/off using button 1
Ñ To switch on the device, press button 1.
The device switches on.
Ñ
To switch off the device, press and hold
down button 1 for longer than two
seconds.
The device switches off.
Note:
To be able to switch on the device,
the connected CRD radio must
already be switched on.
Switching on/off via the connected
radio
If you do not switch off the device with the
button 1, you can switch it on/off by
switching the connected CRD radio off and on
again.
Robert Bosch Car Multimedia GmbH
Switching on and off with micro-
phone 1
If microphone 1 is connected to the device, the
device can be switched on and off with
microphone 1 for announcements. For further
details, read the section "Microphone mode" in
the chapter "Adjusting the volume".
Ñ
Switch microphone 1 on with the device
switched off.
The device automatically switches on and
allows announcements via the connected
loudspeakers.
Ñ
Switch off microphone 1.
The device switches off again.
7 620 210 013 | 10.2009
en | 15