Installation - Bosch CAD 12 Mode D'emploi Et De Montage

64 | en

Installation

Note:
When you connect the device, refer
to the chapter "ISO connector".
If you want to install the device yourself, please
use the supplied mounting frame.
The device can be installed at an angle of –20°
to +60° to the transverse axis and at an angle
of –20° to +20° to the longitudinal axis.
An optimum drive performance is achieved at
an installation angle to ±5° to the horizontal
(forwards/backwards and/or left/right).
Note:
Ensure that the connecting cables are
not pinched during installation.
7 620 210 015/020-022 | 06.2015
182
165
53
1-20
Robert Bosch Car Multimedia GmbH
Installation