Additional Settings; Settings For Connected Devices; Adjusting The Display Format; Adjusting The Color Television Standard Of The Display - Bosch CAD 12 Mode D'emploi Et De Montage

Additional settings

Additional settings
The device's setup menu allows you to make
changes to the settings to suit your prefer-
ences.

Settings for connected devices

Adjusting the display format

The following settings are available for the
display format:
f NORM PS: The DVD player is connected to
a 4:3 display. The wide-screen image is
displayed on the screen at full width with
black bars at the top and bottom edge of
the screen.
f NORM LB: The DVD player is connected to
a 4:3 display. The wide-screen image is
displayed using the full height of the
screen. The left and right edge of the
wide-screen image are automatically cut
off.
WIDE: The DVD player is connected to a
f
16:9 display. The wide-screen image is
displayed on the screen at full size.
To open the setup menu,
f press the SETUP button :.
f Using the or
menu item showing the current setting
("WIDE", "NORM LB" or "NORM PS").
f Select the desired setting using the
button 6.
f Press the SETUP button : to exit the
menu or the or
another menu item.
Robert Bosch Car Multimedia GmbH
button 6, select the
or
button 6 to select
Adjusting the color television
standard of the display
For perfect image quality: On the DVD player
you must set the color television standard that
is used by the connected display.
"PAL" is the standard used in Europe; "NTSC" is
the standard for the American/Asiatic region.
Note:
If this setting is changed, it takes
effect only after the device is
switched off and on again via the
vehicle ignition.
To open the setup menu,
f press the SETUP button :.
f Using the or
menu item showing the current setting
(PAL or NTSC).
f Select the desired setting using the
button 6.
f Press the SETUP button : to exit the
menu or the or
another menu item.

Parental control

You can prevent playback of DVDs that are
unsuitable for minors by defining a rating level.
If a DVD supports rating levels and it does not
correspond to the rating level set on the
device, it will not be played.
Note:
Not all DVDs support rating levels.
7 620 210 015/020-022 | 06.2015
en | 61
button 6, select the
or
button 6 to select