Designation
Yes
No
Reset Min-/Max-value
Programming lock
Calibrations of sensors zero point
New
NOTE:
• If the current pressure exceeds the device's nominal pressure it can no longer
be displayed. The nominal pressure flashes in the display. As a result, when the
menu point Max Value (Hi) is selected, the value of the highest measured
pressure which has been stored flashes until the instrument is reset by "reset
Min-/Max-value" (re.HL) or "reset" (rES).
• If the current pressure is below 0.6 % of the nominal range, the display will
show 0 bar.
8
7-segment display
yes
no
rS. k L
Pr6
CALi
nEU
ASCII
Yes
No
rS.HL
PrG
cALi
nEU