Glass Ember Installation - Napoleon PATIOFLAME Mode D'emploi

12
MKR Rock Installation (Optional)
EN
WARNING!
1. Remove the refactpry logs and lava rocks from your appliance.
2. Place the 4 notched rocks and 2 clusters on the edge of the burner pan as shown, making sure not to
cover any ports.
3. Place the remaining refractory rocks on and around the burner as desired. (There are not set
locations).
4. Spread the lava rock removed in Step 1 and evenly distribute it around the rocks.
Finishing

Glass Ember Installation

WARNING!
Do not change or substitute the glass ember material provided with this appliance. If replacing, use
only replacement glass embers available from your local authorized dealer / distributor.
WARNING!
Clean the glass with mild dish soap, drain, rinse thoroughly and dry before installing.
1. Remove the refractory logs and lava rocks from your appliance.
2. Carefully pour 3 bags of the appliance glass media onto the appliance log support as shown.
3. Spread the glass evenly over the pan burner. The distribution of clear glass over the burner pan will
influence flame height.
www.napoleongrills.com
Real rocks must not be used in this appliance. Heat will cause them to explode.
Notched
Rock
Glass embers may have sharp edges, wear safety glasses and gloves when handling.
Glass embers may have a fine oil residue that needs to be cleaned prior to installation.
N415-0359 JUN 12.18