Problem
Burner output on
"high" setting is
too low. (Rumbling
noise and fluttering
blue flame at burner
surface.)
N415-0359 JUN 12.18
Possible Causes
Lack of gas.
Supply hose is pinched.
Dirty or clogged orifice.
Spider webs or other
matter in venturi tube.
Propane regulator in "low
flow" state.
Solution
Check gas level in propane
cylinder.
Reposition supply hose as
necessary.
Clean burner orifice.
Clean out venturi tube.
Ensure lighting procedure is
followed carefully. All valves
must be in the off position
when the tank valve is turned
on. Turn tank on slowly to allow
pressure to equalize. See lighting
instructions.
www.napoleongrills.com
19
EN