3.2.2 optional glass stand installation
B
C
X5
E
Place appliance on a soft clean surface.
A.
Remove the 4 screws from the bottom of the appliance (Fig. 3-3). Do not throw away screws.
B.
Using the same screws, align the center stand piece to the bottom holes and secure it into the appliance
C.
(Fig. 3-4).
Prepare the glass base and ensure that the rubber feet of the glass base are facing away from the
D.
appliance (Fig. 3-5).
Using the 5 screws supplied (C X 5), secure the glass base into the center piece.
E.
Check if the glass stand is secured properly. Ensure appliance is standing straight and still (Fig. 3-6).
F.
Fig. 3-3
Fig. 3-5
A
B
A
D
D
X1
Fig. 3-4
Fig. 3-6
C
B
C
installation
E
E
X1
W415-2103 / B / 08.24.20
EN
11