SOMFY EVB Notice Installateur page 65

6.6. Modifying the angular travel
For optimal operation of your blind equipped with the EVB - Slim receiver for Variation
io, it is essential to set the angular travel.
The angular travel is the total angle necessary for the blind to change from a slats closed
position to a slats fully open position.
The slats fully open position is reached when the blind continues to rise even though the
slats no longer tilt.
Press the Down button on the control point until the lower
position is reached.
When the blind is in the lower position, press the Up and
Down buttons on the control point for 5 seconds: the
blind
Press the "my" button on the control point: the blind
Move the slats from the slats closed position to the slats
control point.
At any moment, you can press the "my" button to check
on the "my" and Up buttons on the control point until the
blind moves.
© 2013 Somfy SAS. All rights reserved. 02/2013
Up button on the
, press simultaneously