SOMFY EVB Notice Installateur page 56

CONTENTS
1. Introduction
2. Compatibility
2.1. Actuator compatibility
2.2. Compatibility with applications
3. Safety
3.1. Safety and responsibility
4. Installation
4.1. Conditions for use
5. Wiring
6. Commissioning
(only valid for a blind
1. INTRODUCTION
The EVB - Slim receiver for Variation io is a receiver equipped with io homecontrol
It is used to control the majority of motorised external venetian blinds with standard motors supplied
with 230 V (please contact your dealer for further information). The EVB - Slim receiver for Variation io
is used to open, close and change the angle of the slats of these blinds.
Its small size enables it to be discretely installed near to the product it is controlling through a direct
supply cable connection.
The EVB - Slim receiver for Variation io can be used as:
- individual control - one EVB - Slim receiver for Variation io is controlled by one control point.
- multiple control - one EVB - Slim receiver for Variation io is controlled by several control points.
- group control - several EVB - Slim receiver for Variation io are controlled by a single control point.
The EVB - Slim receiver for Variation io can be controlled either by one control point or by an automatic
control device.
56
57
7. Operation
57
58
7.2. Operating with a Somfy sensor or
58
58
8. Modifying the settings
59
8.2. Adding/Deleting Somfy io control
59
8.4. Modifying the position of the
61
62
9. Tips and recommendations
9.1. Questions on the EVB - Slim receiver for
Variation io
9.2. Replacing a lost or broken Somfy io
control point
10. Technical data
© 2013 Somfy SAS. All rights reserved. 02/2013
66
67
68
70
71
® Radio Technology.