Engine Management - Stihl BG 56 Notice D'emploi

English
Version with Pleated Filter Material
1
2 2
Unscrew the filter cover lock (1)
N
counterclockwise.
Remove the filter cover (2).
N
Clean away loose dirt from around
N
the filter.
4
3
Take the air filter (3) out of the filter
N
housing (4).
Cleaning the air filter
Carefully knock the filter out on the
N
palm of your hand or blow it clear
with compressed air from the inside
outwards.
In case of stubborn dirt or sticky filter
fabric
Wash the air filter in STIHL special
N
cleaner (special accessory) or a
clean, non-flammable solution (e.g.
warm soapy water). Rinse the filter
16
from the inside outwards under a jet
of water – do not use a pressure
washer.
Dry the filter – do not expose to high
N
temperatures.
Place the filter in position.
Install the filter element in the filter
N
housing.
Fit the filter cover and tighten the
N
filter cover lock clockwise.
BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C

Engine Management

Exhaust emissions are controlled by the
design of the engine and components
(e.g. carburation, ignition, timing and
valve or port timing).