Starting / Stopping The Engine - Stihl TS 410 Notice D'emploi

Starting / Stopping the
Engine
3
3
2
Press throttle trigger lockout (1) and
N
throttle trigger (2) simultaneously
Hold both triggers down
N
Move the slide control (3) to START
N
and hold it in position too
Release the throttle trigger, slide
N
control and throttle trigger lockout in
succession – starting throttle
position
TS 410, TS 420
4
Set the choke (4) according to the
N
engine temperature
c If engine is cold
e if the engine is warm (even if the
engine is already running but is still
cold or if the warm engine was shut
1
off for less than 5 min)
f if the engine is hot (if the hot engine
was switched off for longer than
5 min)
Versions with decompression valve
5
Press the button (5) of the
N
decompression valve before each
starting procedure
English
27