Maintenance And Repairs; Disposal - Stihl TS 480i Notice D'emploi

English
Max. thickness:
Bore diameter/spindle
diameter:
Tightening torque:
Composite resin abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
38
4.8 mm

Maintenance and Repairs

20 mm
Users of this machine may only carry out
30 Nm
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
103 mm
STIHL recommends that you have
125 mm
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
103 mm
regularly given the opportunity to attend
training courses and are supplied with
125 mm
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
TS 480i, TS 500i