inventiv INV B4037 P Notice Originale D'utilisation page 69

Operation
General Operation
1. Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
2. Double check that accessories or cutting device are properly fixed.
3. Push the product forward by its handle. Keep the handle dry to ensure safe
support.
4. Ensure that the air vents are always unobstructed and clear. Clean them with a
soft brush if necessary.. Blocked air vents may lead to overheating and damage
the product.
5. Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete stop
before averting.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the product.
WARNING!
time of the day and on what special days products are allowed
to be used and what restrictions apply! Ask your community
for detailed information and observe the regulations in order
to preserve a peaceful neighbourhood and avoid committing
administrative offences!
WARNING!
collection bag removed and the rear flap open – danger of flying
objects.
Setting cutting height
1. Push the adjusting lever out of the toothed area.
2. Move the lever up or down to the required height position (1-7).
3. Release the lever and let it slide back into the toothed area.
Note:
Always ensure the lever locks back in its slot.
In some countries regulations define at what
WARNING! Never use the product with the grass
69