inventiv INV B4037 P Notice Originale D'utilisation page 67

For charging, the battery temperature must be within the specified temperature range.
See section "Technical Data" for reference.
1. Connect the charger to an electrical outlet. The indicator light (14) will turn a
steady green, which shows the charger is ready for charging.
2. Insert the battery pack into the charger. The indicator light (14) will start flashing,
which means charging is in process. The indicator lights (16) on the battery to
display remaining battery charge will also ignite. .
3. When fully charged, the indicator lights (16) on the battery will all ignite briefly and
then shut down. The indicator light (14) on the charger will stop flashing and turn
into a steady green again.
Indicator lights on the charger
a. When the charger is plug on with no battery inside, the indicator light shows a
steady green light.
b. While a battery is being charged, the indicator light will flash green.
c. A steady green indicator light shows that the inserted battery is fully charged.
d. In cals of any problems, the indicator light will flash red. . If any problems the red
LED will be flashing.
NOTE!
When the battery pack is fully charged, we recommend removing
the battery pack should be taken of the charger to prevent
overcharge.
Notice: If you do not use the product for a long time, please charge
and discharge the battery pack once every 6 months.
14 16
67