Driving time is approx. 4 to 6 minutes, depending on driving style and battery capacity. Terminate the trip in time and
return to the shore. Open the hull deck. Disconnect the drive from the model and switch off the transmitter.
Check whether any water has entered the model. Ingressing water must be removed at once. Observe that the water
does not enter the remote control or drive parts during emptying.
Low water volumes entering (max. approx. 10 ml per trip) is normal; it must be emptied after every operation.
After a trip, the motor and speed control must cool off to ambience temperature. Therefore, make a break of
approx. 5 to 10 minutes before the next trip. The canopy should remain disassembled for better cooling.
41