Safety; General Safety Instructions; Recommendations; Specific Safety Instructions - BRÖTJE KB3 B SGB E Notice De Montage

en

1 Safety

1 Safety
1.1

General safety instructions

1.2

Recommendations

1.3

Specific safety instructions

12
Caution
There is a risk of significant material damage when installing the
accessories. Accessories must therefore only be installed by
trained contractors and commissioned by a competent person
appointed by the system installer. Accessories used must
correspond to the technical regulations and be approved by the
manufacturer in combination with these accessories.
Caution
Only genuine spare parts may be used.
Danger
Risk of death due to modifications to the boiler!
Unauthorised conversions and modifications to the boiler are not
permitted, as these can put people at risk and cause damage to
the boiler. Failure to comply with these instructions renders the
approval for the boiler void.
Cascade kit KB3 SGB E is designed to route together the flow and return
connections from two gas-fired condensing boiler series Eurocondense
400 kW-540 kW with the same output.
Cascade kit KB4 SGB E is designed to route together the flow and return
connections from two gas-fired condensing boiler series Eurocondense
610 kW- with the same output.
See
assembly instruction of the gas condensing boiler used must
The
be followed.
Danger
Risk of injury from falling heavy loads! Persons taking part in
transportation must wear protective gloves and safety shoes!
7307462 - 05 - 15042020