Skandika Vinur Mode D'emploi page 31

STEP 4
1. Put handlebars (44) through the webbing guidance (40) and slide foam (45) onto the handlebars (44).
2. Connect the sensor wires (82) to computer (42) and carefully x the computer (42) on the computer support
(43) with the provided screws (64) and at washers (148).
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE DEVICE!
31
ASSEMBLY INSTRUCTIONS
#64 Screw 4 pcs
.
#148 Washer 4 pcs.
#A