Maintenance - Silverline RS5322B01 Manuel D'utilisation

Note: Continuous use could cause the burners to change colour due to the high
temperature.
Prior to any operation, disconnect the appliance from the electrical system. For long-life
to the equipment, a general cleaning operation must take place periodically, bearing in
mind the following:
• After cleaning the pan supports, dry them with a cloth. Do not leave them wet.
• Clean the worktop periodically with soft detergant and damp cloth.
• The wall baffle and the small covers (mobile parts of the burner) must be washed
frequently with boiling water and detergent, taking care to remove every possible
• After cleaning the burners, make sure that they are placed properly. encrustation.
Dry carefully and check that none of the burner holes is fully or partially clogged;
• The electrical parts are cleaned with a damp cloth
and are lightly greased with lubricating oil when
still warm.
• The stainless steel grids of the working area, after
having been heated, take on a bluish tint which
does not deteriorate the quality. To bring colour
back to its original state, use a slightly abrasive
product.

MAINTENANCE

55