Using The Product; Manual Ignition - Silverline RS5322B01 Manuel D'utilisation

BURNERS
A diagram is screen-printed above each knob on the front panel. This diagram indicates
to which burner the knob in question corresponds. After having opened the gas mains or
gas bottle tap, light the burners as described below:
•

Manual ignition

Push and turn the knob corresponding to the required burner in an anticlockwise
direction until it reaches the full on position (large flame fig. 1), then place a lighted
match near the burner.
•
Electrical ignition
Push and turn the knob corresponding to the required burner in an anticlockwise
direction until it reaches the full on position (large flame fig. 1), then depress and release
the ignition button.
•
Automatic electrical ignition
Push and turn the knob corresponding to the required burner in an anticlockwise
direction until it reaches the full on position (large flame fig. 1), then depress the knob.

USING THE PRODUCT

50