Silverline RS5322B01 Manuel D'utilisation page 43

The measurements of the opening made in the top of the modular cabinet and into
which the hot plate will be installed are indicated in either fig. 7. Always comply with the
measurements given for the hole into which the appliance will be recessed (see fig. 7
and 8). The appliance belongs to class 3 and is therefore subject to all the provisions
established by the provisions governing such appliances.
FIXING THE HOT PLATE
The hot plate has a special seal which prevents liquid from infiltrating into the cabinet.
Strictly comply with the following instructions in order to correctly apply this seal:
40