Superwinch S2500 Mode D'emploi page 3

Cabrestante eléctrico de 12 y 24 voltios cd con control remoto
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

U N P A C K I N G
This carton contains the following items. Please unpack carefully.
Read instructions before beginning.
Description
Winch assembly with wire rope including lead wires
Circuit breaker assembly with hardware
Handsaver bar
Mounting hardware kit
Remote pendant
Owner's manual
G E N E R A L D E S C R I P T I O N
Figure 1
F E A T U R E S
Electric Motor – 0.7 peak hp (0.5
kW) 12 Volt Permanent Magnet or
0.7 peak hp (0.5 kW) 24 Volt
Permanent Magnet.
Braking – A wrap spring brake
which will hold a 1,250 lb. (567 kg)
load on the first wrap. Reducing by
approximately 10% per layer
thereafter (P/N 02510 is not
equipped with a brake).
Drum – Die cast aluminum running
in maintenance free bearings.
Freespool Clutch – Operated by
an easy action lever which disen-
Integrated Solenoids
Freespool Clutch
In-Drum Brake
gages the gearbox to allow the
wire rope to be pulled out without
using electric power. A tension
plate reduces backlash and snarling
when pulling out the wire rope.
Remote Switch – 12' (3.66 m)
hand held pendant switch assembly
with interlocking reverse switch and
trigger.
Mounting – Optional custom engi-
neered mounting kits are available
for vehicle frame attachment.
Quantity
1
1
1
1
1
1
Permanent
Magnet Motor
Remote Switch
Receptacle
3

Publicité

Table des Matières
loading

Table des Matières