Maintenance And Repair; Disposal - Franke SMART FHSM 604 4I Manuel D'utilisation

EN

MAINTENANCE AND REPAIR

Make sure that maintenance on electrical
Z X
components is carried out only by the
manufacturer or the customer service.
Make sure that damaged cables are changed only
Z X
by the manufacturer or the customer service.

DISPOSAL

Packaging
All packaging materials (cardboard, plastic film (PE)
and polystyrene (EPS)) are marked and should, if
possible, be collected for recycling and disposed of
in an environmentally friendly way.
Disconnection
Disconnect the appliance from the mains. With
X X
a fixed appliance, this must be carried out by a
qualified electrician.
Safety
Disable the appliance to prevent accidents
X X
caused by improper use, especially through
children playing.
Disposal
The symbol on the product or on the
packaging indicates that the device must
not be disposed of in the domestic waste.
By disposing of the device in a proper way you help
to avoid harmful consequences to environment and
health.
Further information about recycling the device is
available from the competent authority, the local
refuse disposal service or the vendor of the device.
FHSM 604 4I / FHSM 603 3I / FHSM 603 3I DZ / FHSM 804 4I /
FHSM 803 3I / FHSM 302 2I / FHSM 604 4I WH / FHSM 603 3I DZ WH
When contacting the customer service, please
X X
provide the following information:
– type of fault
– appliance model (Art.)
– serial number (S.N.)
This information is given on the data plate. The data
plate is attached on the bottom sind.
You must also have proof of purchase if you're still
within the warranty period.
Dispose of the device, which is to be discarded,
Z X
via a specialised waste collection point for
electronic and electrical devices.
In accordance with the article of Legislative Decree
no. 15 dated 25 July, Implementation of Directives
2002/95/EC,2002/96/EC and 2003/108/EC,
regarding the reduction of the hazardous substances
used in in electrical and electronic appliances, and
waste disposal".
The barred dustbin symbol on the appliance indicates
that at the end of its working life the product must
not be disposed of as household waste.
Consequently, when the appliance has reached
the end of its working life the user must take it
to a suitable recycling centre for electronic and
electrotechnical waste, or return it to the dealer
when purchasing a new appliance of equivalent type.
Proper separate waste collection of the scrapped
appliance for subsequent recycling, treatment and
environmentally-friendly disposal helps prevent a
potentially negative impact on the environment and
health and facilitates recycling of the materials used
in appliance construction.
– 18 –