Franke SMART FHSM 604 4I Manuel D'utilisation page 17

Models: FHSM 603 3I DZ / FHSM 804 4I / FHSM 803 3I / FHSM 302 2I / FHSM 603 3I DZ WH
Error code
C
C/-
E
E/2
(error code different
for some UI)
E/3
E/4
E/5
E/6
E/7
E/8
E/9
E/A
E/C
E/H
No functionality and
no displaying
FHSM 604 4I / FHSM 603 3I / FHSM 603 3I DZ / FHSM 804 4I /
FHSM 803 3I / FHSM 302 2I / FHSM 604 4I WH / FHSM 603 3I DZ WH
Description
The cooking zone can be configured.
The cooking zone will be configured.
If „-„ is not displayed check the
possible causes of the E/5.
A flashing „E" on each cooking zone
indicates that all configs will be
deleted.
Temperature limits are exceeded.
Unsuitable pot
Unconfigured induction module
No communication between UI and
induction module
Main power disturbance
Fan failure
Defect ive temperature probe on
inductor
Hardware defect of induction module
Configuration failure
Fixed sensor value
Overvoltage on the switch mode
power supply (no functionality)
Remedy
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
System must cool down.
Change the pot / pan; if the error persists,
contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Allow system to cool.
Disconnect and connect the power line
connection; if the error persists, contact
authorized center for technical assistance
specifying the error code.
– 17 –
EN