Removing The Guide Rails; Replacing The Oven Light - ETNA OM370RVS Mode D'emploi

CLEANING

Removing the guide rails

Replacing the oven light

EN 18
Use conventional cleaning products to clean the guide rails.
• Remove the screw (A) at the bottom of the guide rails.
• Grasp the guide rails at the bottom and tilt them towards the middle
of the oven (B).
• Remove the guide rails from the holes in the back wall (C).
A
The light (E14, 230-240 V, 25 W, 300 °C) is a consumer item and
therefore does not fall under the guarantee.
Cut the power to the appliance by removing the plug from the
socket or switching off the fuse in the fuse box!
1. Turn the cover to the left to remove it.
2. Unscrew the bulb from the fitting and replace it with a similar one.
Please note: the light can be very hot! Use protection to remove
the bulb.
C
B