Franklin Electric BT4 Serie Guide D'utilisation page 14

APPENDIX 3 - BT4 INSTALLATION RECORDS
To keep an accurate record of your installation, be sure to fill out the data below:
Date of Installation: __________________ ___________ _
Model No: __________________________ ___________
Source: ______________________________________
Well_________ Tank/Cistern_________ Municipal Supply_________ Other Pressurized Source__________
(If the source is a well, note the well data)
Well Data:
Depth of Well (ft): ______________________ _ _______________
Depth to Water (ft): ____________________________________
Inside diameter of well: _________________________________
(If the pump is supplied with water from a pressurized source, note the following)
Pressurized Source:
Incoming Pressure (psi):________________________________
Diameter of Supply Line (in): _____________________________
Incoming Flow Available (gpm): __________________________
Suction Pipe Diameter: ________________________________
Discharge Pipe Diameter: ______________________________
Motor Mfg:____________________________________________
Motor Mfg Model Number: _____________________________
Motor hp:_____________________________________________
Motor Voltage: ____________ ____________________________
Wire Gauge Size:_______________________________________
14