Child Safety Lock; Open Window Detection - Sonnenkonig VIDRO 1000 Mode D'emploi

8.6 Switch off display / ECO-Mode
Press the and -buttons at the same time for 3 seconds or press the
remote to switch off the display.
To reactivate the display press below the display or press the -button on the remote.

8.7 Child safety lock

Press the and
remote to trigger the safety lock. The child safety lock indicator is shown on the display:
To turn the safety lock off again, press the
8.8 Temperature level settings
To engange high mode press the
remote.
To engange low mode press the

8.9 Open window detection

If the room temperature drops 2° C within two minutes, the device indicates an open window via
the symbol on the display together with a beep sound and stops heating.
To reactivate the device, close all windows and take measures to prevent another drop in the
temperature and reboot the device.
8.10 Delete settings
To delete all settings, press the
8.11 Setting Daytimer
To set the day timer ensure that the device is currently in day timer mode. Press the SET button
on the remote control to set the time for daily heating. Control the hour and minute with the
and -buttons.
-buttons at the same time for 3 seconds or press the
or -button on the device or the
or -button on the device or the
-button on the device for 10 seconds.
51
and -buttons at the same time for 3 seconds.
-button on the
-button on the
-button on the
-button on the remote.
EN