Unpacking And First Operation; Unpacking; Connection And Installation Of Titrator And Magnetic Stirrer Tm 235 - Xylem SI Analytics TitroLine 7500 KF Mode D'emploi

80
2

Unpacking and First Operation

2.1 Unpacking

The titrator itself as well as all related accessory and peripheral parts have been carefully checked at the factory
to ensure their correct function and size. The TitroLine
• TitroLine 7500 basic unit
®
• An interchangeable dosing unit WA 05, WA 10 or WA 20
• The KF titration stand (pump and stirrer) TM 235 KF including waste (1 L clear bottle), solvent (1 L amber
bottle) and moisture bottle (100 ml) with all tubes.
• Titration vessel TZ 1770 including titration tip
• KF starter kit TZ 1789 with molecular sieve, glass wool and a set of syringes with needles.
• Electrode KF 1100
Please ensure that the small accessories are also removed in full from the packaging. For the scope of delivery,
please refer to the enclosed parts lists.
Fig. 1

2.2 Connection and installation of titrator and magnetic stirrer TM 235

The low voltage cable of the power supply TZ 1853 has to be plugged in to the 12 V socket „in", (see Fig. 8 back
panel, chapter. 2.4.1), on the back panel of the titrator. Then plug the power supply into the plug socket.
® 7500 KF modules consists of: