Balance Data Editor - Xylem SI Analytics TitroLine 7500 KF Mode D'emploi

138

7.2 Balance data editor

Pressing the die <F5/balance symbol > function key will invoke the so-called balance data editor.
A list with the existing balance data will appear:
Fig. 127
The balance data can be edited one by one. Following a change, a cross will appear opposite the weighed-in
quantity:
Fig. 128
Weights may be deleted or added individually. It is also possible to delete all weights at one stroke.
Fig. 129
If no balance data is available, the "No balance data found" message will appear: