Troubleshooting - Breville the Dose Control BCG400SIL Mode D'emploi

Troubleshooting

PROBLEM POSSIBLE CAUSE
•
Grinder does not start Grinder not plugged in
•
after pressing START/
Bean hopper not installed
CANCEL button.
correctly.
•
Grinder has overheated.
•
Motor starts but no ground No coffee beans in bean
coffee coming from grind outlet. hopper
•
Grinder/bean hopper is
blocked.
•
Can't adjust the Grind Grind Size Collar too tight.
Size Collar.
•
Coffee beans and grinds
caught in the burrs.
•
Hopper not installed
correctly.
13
WHAT TO DO
•
Plug power cord into power outlet
•
Lock bean hopper into position. refer to the
Bean Hopper section on page 7.
•
Leave for 20 minutes to cool
down and unplug power before using again.
•
Fill bean hopper with fresh coffee beans
•
Remove bean hopper. Inspect bean
hopper and burrs for blockage. Refer to the
Cleaning Conical Burrs section on page 11.
•
Run the grinder by pressing the
START|CANCEL button while turning the
Hopper.
•
Run the grinder by pressing the
START|CANCEL button while turning the
Hopper.
•
Unlock the hopper and install as per
instruction. Refer to the Bean Hopper
section on page 7.
Dose Control
the
Manuel d'instructions - BCG400SIL
MC
14