Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
Slide A in the direction of the arrow and
reattach the Grip Belt.
4
Attach the Grip Belt around your wrist.
≥When returning the Grip Belt to the Grip Belt
Attachment, press the Lock Cover 2 to ensure
that it is securely locked.
Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1
Pass the end of the Lens Cap Cord through
the hole in the Grip Belt Attachment part
and the Lens Cap through the Lens Cap
Cord.
≥The removed Lens Cap can be hooked onto the
Grip Belt. (It is not possible when using as a
hand strap.)
≥When you are not recording, be sure to cover
the Lens with the Lens Cap for protection.
Before Use
A
2
Attaching the Shoulder Strap
We recommend that you attach the Shoulder
Strap before going out to avoid dropping the
Camcorder.
1
Pull the end of the Shoulder Strap through
the Shoulder Strap Holder
Camcorder.
2
Fold the end of the Shoulder Strap, run it
through the Shoulder Strap Length
Adjuster, and pull it.
≥Pull it out more than 1 inch (2 cm) 1 from the
Shoulder Strap Length Adjuster so that it
cannot slip off.
1
≥Attach the other end of the Shoulder Strap to
the other Shoulder Strap Holder in the same
way.
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever
the front and pull down to open the
Cassette Compartment Cover.
2
Insert a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark 1.
1
PUSH
4
Close the Cassette Compartment Cover.
-18-
(52)
on the
(38)
toward
(38)
Publicité
Chapitres
Table des Matières
