Using The Viewfinder; Using The Lcd Monitor - Panasonic PV-DC152 Mode D'emploi

CAMERA
VCR
CARD
P.B.
12:30:45AM
12:30:45AM 12:30:45AM
OCT 15 2002 OCT 15 2002 OCT 15 2002
1
2
OPEN
!
2
180x
LCD/EVF SET
LCD BRIGHTNESS
LOW||||----HIGH
LCD COLOR LEVEL
LOW||||----HIGH
EVF BRIGHTNESS
LOW||||----HIGH
PUSH MENU TO RETURN
14
Turning on/off the Palmcorder and Selecting
Modes
3
Turn on the power first and then select Modes.
M
1
ª How to Turn on the Power
1, 2
1
Set the [OFF/ON/MODE] Switch to [ON] while pressing the
center Button
≥The [CAMERA] Lamp lights up.
ª How to Switch Modes
2
Rotate the [OFF/ON/MODE] Switch.
≥With each slide of the Switch, the Mode switches in the order of Camera
≥The appropriate Mode Lamp lights up.
ª How to Turn off the Power
3
Set the [OFF/ON/MODE] Switch to [OFF] while pressing the
center Button
~~~~~~~~~~~~~~~~~~~~~~~~

Using the Viewfinder

Before using the Viewfinder, adjust the field of view so that the displays inside
the Viewfinder become clear and easy to read.
12:30:45AM
1
Pull the Viewfinder.
OCT 15 2002
2
Adjust by turning the Eyepiece Corrector Knob

Using the LCD Monitor

With the LCD Monitor open, you can also record the picture while watching it.
1 1 1 1
Set the [OFF/ON/MODE] Switch to [ON].
2 2 2 2
Bring out the [OPEN] Tab about 90x in the direction of the
arrow to open the LCD Monitor.
1
≥The Viewfinder goes off.
3 3 3 3
Adjust the LCD Monitor angle according to the desired
recording angle.
≥The LCD Monitor can rotate a maximum of 180x
Closing the LCD monitor
Push the LCD Monitor until it is securely locked.
ª Adjusting Brightness and Color Level
3
90x
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES],
the following items are displayed:
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder.
1
Press the [PUSH] Dial and select the item you want to adjust.
2
Rotate the [PUSH] Dial and increase or decrease the number
of the vertical bars on the Bar Indication.
≥The Bar Indication has 8 steps. A larger number of vertical bars
Increasing the Brightness of the Entire LCD Monitor
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].
≥These adjustments do not affect the recorded images.
≥For other notes, see page 62.
1
.
Mode, VCR Mode, and Card Playback Mode.
(PV-DC252/PV-DC252-K)
1
.
position to the upward direction and a maximum of 90x
downward direction. Forcefully rotating the LCD monitor beyond these
ranges will damage the Palmcorder.
indicates stronger brightness or color saturation.
1
.
2
from the vertical
3
to the