ª Operating environment
For Windows
OS:
IBM PC/AT compatible personal computer with
pre-installed
Microsoft Windows XP Home Edition/
Professional
Microsoft Windows 2000 Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition
CPU:
Pentium-based PC or equivalent [1, 3, 4]
Pentium II-based PC or equivalent [2]
(Pentium II 300MHz or higher recommended)
Graphic display:
High Color (16 bit) or more
Desktop resolution of 800k600 pixels or more
*QuickTime and/or VRML viewer needed. [1]
RAM:
64 MB or more (128 MB or more is
recommended)
Free hard disk space:
At least 625 MB
Other requirements:
Mouse
For Macintosh
OS:
Mac OS 9 – X
CPU:
PowerPC
Graphic display:
High Color (16 bit) or more
Desktop resolution of 800k600 pixels or more
*QuickTime and/or VRML viewer needed. [1]
RAM:
64 MB or more (128 MB or more is
recommended)
Free hard disk space:
At least 300 MB
≥This instruction manual describes only the
procedures for installation, connection and
start-up. Please read the Help messages of
your software for how to use the ArcSoft
Software Suite.
With a PC
ª Installation of ArcSoft Software Suite
For Windows
1
Insert the supplied CD-ROM into the
personal computer's CD-ROM drive.
2
Select the software to be installed from
[Setup Menu].
3
Select the desired language on the
[Choose Setup Language] dialogue, and
click [OK].
≥Installation begins.
≥After reading the displayed contents, please
carry out the installation according to
instructions.
≥If a language other than the OS language is
selected, the characters may not be
presented correctly.
4
When the component selection screen is
displayed, check the software to be
installed and click [Next].
5
After the completion of setup, click on
[Finish].
≥Installation will be completed.
-63-