Manual Focus Adjustment; Using The Built-In Flash - Panasonic PV-GS120 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To Resume Automatic Adjustment
Set the [AUTO/MANUAL/FOCUS] Switch to
[AUTO].
≥For other notes concerning this item, see

Manual Focus Adjustment

Focus can be adjusted manually for recording in
a situation where auto focus may not function
well.
1
Set the [AUTO/MANUAL/FOCUS] Switch
(35)
to [MANUAL].
AUTO MANUAL
FOCUS
(35)
≥The [MNL] Indication appears.
2
Slide the [AUTO/MANUAL/FOCUS] Switch
(35)
to [FOCUS].
AUTO MANUAL
FOCUS
(35)
≥The [MF] Indication (Manual Focus Mode)
appears. (PV-GS200)
≥The [1MF] Indication (Manual Focus Mode)
appears. (PV-GS120)
MNL
MF
PV-GS200
3
(PV-GS200)
Turn the Focus Ring
focus.
(24)
(PV-GS120)
Press the [5] Button
(19)
to adjust the focus.
STILL
ENTER
s
i
FADE
(19)
(16)
≥If you keep pressing the [5] Button or [6]
Button, the speed of adjusting will be faster.
Recording Mode
.
-74-
MNL
MF
PV-GS120
(24)
to adjust the
(16)
or [6] Button
To Resume Automatic Adjustment
Set the [AUTO/MANUAL/FOCUS] Switch to
[AUTO] or [FOCUS].

Using the Built-in Flash

(PV-GS200 only)
The Built-in Flash enables you to record still
pictures in a dark place. The Flash lights twice to
detect the surrounding luminosity and to light
properly.
1
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [CAMERA]
>> [FLASH] >> [ON] or [AUTO].
STILL
ENTER
s
FADE
(14)
MENU
≥If [AUTO] is selected, the Flash can be
lighted if light is needed by sensing the
surrounding luminosity.
2
Slide the [ßL] Lever
(21)
≥The Flash pops up.
3
Press the [STILL] Button
(15)
STILL
ENTER
s
FADE
≥Flash is lighted and the image becomes still.
4
Press the [PHOTO SHOT] Button
Recording Start/Stop Button
PHOTO
SHOT
(47)
(42)
≥Flash is not lighted when recording.
Adjusting Brightness of the Flash
Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [CAMERA] >>
[FLASH LEVEL] >> a desired Flash Level.
≥Normally, set it to [NORMAL]. (The [ß]
Indication appears.)
≥If the brightness is not enough in [NORMAL]
setting, set it to [i] (the [ßi] Indication
appears), if it is too much, set it to [j] (the [ßj]
Indication appears).
≥For other notes concerning this item, see
-38-
i
(21)
.
(15)
.
i
(47)
or
(42)
.
-74-
.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Pv-gs200

Table des Matières