Display Mode - Cardin Elettronica 310/GLB249M Manuel D'instructions

dISPLAy MOdE

Using the PROG button you can access the following functions
in sequence:
- memorising the status of the dip-switches;
- display the status of the command and safety devices;
- display the number of manoeuvres;
- access the "test" mode;
- enabling/disabling automatic reclosing in the presence of an obstacle;
- setting the current sensor level;
- setting the distance from the opening direction travel limit;
- safety contact selection (N.C./8.2 kΩ);
- enabling the digital safety edge.
25