Care And Maintenance, Recalibration; Guarantee - Microlife BP 3BTO-A Mode D'emploi

7.

Care and Maintenance, Recalibration

a) Do not expose the device to either extreme temperatures,
humidity, dust or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle the
cuff carefully and avoid all types of straining through
twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use gasoline,
thinners or similar solvents. Carefully remove spots on the
cuff with a damp cloth and soapsuds. Do not wash the
cuff in a clothes or dishwasher!
d) Handle the tube carefully. Avoid stress from pulling,
pinching and sharp edges.
e) Do not drop the instrument or treat it roughly in any way.
Avoid strong vibrations.
f) Never open the device! This can negatively impact the
calibration! (accuracy)
g) The batteries should be removed, if the device is not going
to be used for an extended period of time. Do not continue
to use batteries beyond the expiry date indicated.
Periodical re-calibration
Sensitive measuring devices must be checked for accuracy from time to time. We recommend a periodical
inspection of your device by an authorized microlife dealer every 2 years. Your factory authorized Microlife
dealer would be pleased to provide more information regarding calibration.
8.

Guarantee

This blood pressure monitor is guaranteed for 3 years from date of purchase. This guarantee includes the
instrument and the cuff. The guarantee does not apply to damage caused by improper handling, damage
from leaking batteries, accidents, not following the operating instructions or alterations made to the
instrument by third parties.
The guarantee is only valid upon presentation of the guarantee card filled out by the dealer.
Name and company address of the responsible dealer:
10
Gasoline