Operation - Bartscher 162900 Mode D'emploi

5.2 Operation

CAUTION!
The deep fat fryer can be serviced only be people who are familiar with
operation of the device and the risks occurring during frying.
Preparation of the device
•
Remove the lid and take out the fryer basket out of the device.
•
Detach the control box from the device by lifting it carefully (until you hear „click"
sound).
•
Before the first use, clean the device according to the instructions in section 6
„Cleaning". Make sure that no water gets into the electrical installation or control
box. Dry the device and accessories thoroughly!
•
Carefully place the control box on the rear edge of the oil basin until it „click".
Pivot at the bottom of the control box must be placed in the opening of the oil
basin for the device to be set correctly.
Notice: For safety reasons, the device operates only when the control box is properly
secured to the body, thanks to which the micro switch indicates that the device is
ready to operation.
Control elements
Power indicator (green)
ON/OFF switch
- 34 -
Heating indicator
Control box with heating element
Temperature controller