Technical Specification; Installation And Operation; Installation - Bartscher 1KA10 Mode D'emploi

4.2 Technical specification

Name
Code-No. / type:
Material:
Model:
Power:
Temperature
adjustment:
Size:
Weight:
Accessories:
We reserve the right to make technical changes!

5. Installation and operation

5.1 Installation

Positioning
•
Unpack the device and remove all packing material.
•
Remove the protective foil from the device. Would the residues of glue remain,
removed them with an appropriate solvent.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•
Never place the device on the flammable surfaces.
•
Do not place the device near open flame, electric heaters or other heat source.
•
Never place the device in humid or wet environment.
•
When locating the device make sure there is a 10 cm gap from any walls or other
objects.
•
When locating the device, make sure the power plug is easily available to
immediately unplug the device when necessary.
A120465 / 1KA10
1 container,
without drain tap;
W 240 x D 300 x H 150 mm
1 kW / 230 V 50/60 Hz
W 270 x D 350 x H 240 mm
5.65 kg
1 lid, hinged, removable;
1 grate
Sausage warmer
A120466 / 2KA20
Stainless steel
each with drain tap
W 240 x D 300 x H 150 mm
2 kW / 230 V 50/60 Hz
30 ° C to 90 ° C
W 535 x G 370 x H 240 mm
2 lids, hinged, removable;
2 containers,
10.7 kg
2 grates
- 27 -