Installation And Operation; Positioning And Connection - Bartscher 1240L Mode D'emploi

5. Installation and operation

5.1 Positioning and connection

CAUTION!
The installation, maintenance and repair should only be carried out by the
authorized installer!
Positioning
•
Before the operation unpack the device and remove all package material and
protective foil from the device and equipment.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Position the device in safe place of load capacity sufficient for weight of the device
with full content.
•
Never place the device on the flammable surfaces.
•
In order to avoid the compressor damages do not tilt the device during positioning
or transport by more than 45° .
•
Do not place the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources like direct sunlight. High temperature may damage the device
surface and may impact the cooling capacity and energy consumption.
•
During the device installation keep in mind that the environment temperature should
not be lower than 0 ° C and higher than 38 ° C.
•
Do not place the device in places of high air humidity. The excessive humidity may
damage the device.
•
Place the mini cold room so that there is enough space to open the door and
operate the device and sufficient air circulation around the device is ensured. Keep
a distance of at least 50 cm from the ceiling and the distance of 10 cm from the
walls and other objects.
•
Never cover the ventilation holes of the device.
•
Do not bore holes or install other objects in the device.
•
Do not place any heavy objects on the device.
•
Position the device in such way that the plug is easily accessible for quick
disconnecting when required.
- 32 -