SOMFY Heating Slim Receiver io 2kW Notice page 26

EN
Switch type
PTI (Proof Tracking Index)
Cooling condition
Protection device
Number of operating cycles
Pollution index
Break type
Dimensions of the standard io Heating Slim Re-
ceiver (L x l x H)
Maximum number of connected control points
Load type
Design
Heat and fire resistance
Coating type for PCB
Test conditions
Somfy hereby declares that the radio equipment covered by these instructions is in
compliance with the requirements of Radio Directive 2014/53/EU and the other essential
requirements of the applicable European Directives.
The full text of the EU Declaration of Conformity is available at www.somfy.com/ce.
24
S
> 175V
No forced cooling
No protection device
3000 (3E3)
2
Microbreak
111 x 30 x 31 mm
9
Practically resistive load, cos φ > 0.9
B design
Level 2
Type A
Simulated with a practically resistive load (2kW)
Copyright © 2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Heating Slim Receiver io 2kW
S = Specimen